Share

Wednesday, April 30, 2014


Hello Everyone! Isn't it a fine day to learn how to insert zippers on dresses? :)

Don't forget: If you don't want your clothes to look messy and home-made, you must pay special attention to details like this!

If you have trouble in sewing zippers  neatly, follow this tutorial and I'm sure you'll perfect it immediately.

So let's start!
You have already made your mind about which pattern to sew and made your dress. You also assembled the interlining and your dress looks almost perfect! :)
Mine looks like this:
image
So you already lined the bodice and closed the facings. When you unfold the bodice it should look like this:
insert zippers to lined dress
1- Pin the zipper on the interlining so that it faces the wrong side (you'll then turn it around and see that the fabric-ends of the zippers will be folded in between the bodice front and bodice lining)
image
2 - Now start sewing the zipper on the lining - Use a regular zipper foot.
image
So it should look like this on the other side once you stitch the zipper onto the lining:
image
3- Smart Sewing Tip: Once you stitch the zipper onto the fabric using a regular or a zipper foot, go over it just 1-2 millimeters closer to the zipper with an invisible zipper foot so that it looks much neater once it's finished!
image
4 - Once you finish sewing the zipper to the lining, it is time for sewing it onto the bodice fabric. The zipper should be in-between the lining and fabric, faced inwards. The fabric end of the zipper should be on the outside. 
image
5 - Now stitch it onto the bodice by following steps 2 and 3. 
image
image
6 - Once it's finished, it should look like this from backwards:
image
7 - Not finished! We have another side to stitch :)
image
8- Follow steps 2 and 3 once again. 
image
9 - Smart Sewing Tip: It is always tricky to sew the "head" of the zippers when you're using a regular sewing machine. What I do to avoid crooked stitch lines is to sew it until the zipper foot hits the "head", then open the zipper (push the "head" below") and re-stitch the remaining end. 
image

image
10 - OK, we're done! The zipper should like this from the inside:
image
Once you close the zipper it looks like this. 
image

Tagged: , , , , , ,